The modern method of making clogs

The modern method of making clogs
1 drawing: To turn a piece of wood into a pair of clogs, you must first select the wood that has dried in the shade, and then use a template to draw the initial shape of the clogs on the wood, and cut it by machine or manually.
There is a natural curvature when separated, and everything is a pair, and no part is wasted.
2 Drying: After sawing out the initial shape with a machine, it should be exposed to the sun for about a week to make the clogs less perishable.
3 chopping: Use an ax to cut out the radian of the edge of the shoe delicately.
4 Soaking: Soak the initial shape of the clogs in a bucket filled with water, so that the clogs will not be hard to grind due to dry wood during the planing process.
5 Planing: The master craftsman on the special inclined platform, bent his feet and raised it, fixed the clogs and began to grind them.
6 Re-planing: The clogs are worn on the feet, of course they must be worn comfortably. The master craftsman carefully modifies the surface, edges and corners of the clogs or the heel of the clogs to make them smooth.
7 paint: paint the polished clog shoe platform with a layer of varnish.
8 Nails: Finally, put nail ears on the surface of the clogs, so that a pair of clogs is completed.
9 Clogs: Sober and clean, it is nostalgic for the formation of ancient clogs.